This project is still in it's startup phase which means that a lot of things aren't well thought through. The code of this project is partially based on the example project for the data logger shield ...

uint8_t sensor1[8] = { 0x28, 0xF2, 0x00, 0x07, 0xD6, 0x01, 0x3C, 0x95 }; uint8_t sensor2[8] = { 0x28, 0x35, 0xAB, 0x07, 0xD6, 0x01, 0x3C, 0xCC }; uint8_t sensor3[8 ...

In one of our previous tutorials, we have shown you how you can interface LM35 Temperature Sensor with Arduino because it's cheap, easy to use, and requires minuscule power for stable operation. But ...

[Stewart] tipped us about his very nice project: pokewithastick. It is an Arduino compatible board (hardware, not footprint) based on the ATMEGA1284P which can be programmed to collect and post data ...

In many applications data collection is remote and Wi-Fi and Internet are not available. In addition and in lieu of other backup opportunities, a simple on-demand logger would be a nice resource for ...

Now you can prove that you have the bumpiest commute in the office by measuring how rough your ride actually is. [Techbitar] calls the project the Bump-O-Meter. It uses an Arduino, GPS, and ...

How do you save data from an Arduino-based device to a memory card? Fortunately, a microSD card and SD card breakout board now make this an easy task. Below is a simple tutorial on how to capture data ...

The first tests under a CMH type lamp environment have not been validated. Indeed, lack of data or erroneous data. I found a DS18B20 with Teflon shielded cable (heat resistant). The cable of this one ...