The DCF77 receiver is connected to digital pin 15. The sketch attaches an interrupt to measure the length of the pulses. A 0.1 sec pulse is binary 0, a 0.2 sec pulse is binary 1. One pulse per second, ...

A word clock – a clock that tells time with words, not dials or numbers – is one of those builds that’s on every Arduino neophyte’s ‘To Build’ list. It’s a bit more complex than blinking a LED, but an ...

Arduino has launched its next generation of UNO boards, introducing a 32-bit Renesas microcontroller and Espressif ESP32-S3 module, one-click cloud connectivity and plenty of I/O plus a 12×8 red LED ...

Install VS Code Extension Connect your Arduino UNO R4 with a USB-cable pio run --target upload or use the GUI controls.

Connector to add external battery to real-time clock (RTC) inside Renesas MCU (MCU RTC power pad held to 5V rail on Minima) Secondary (wireless) processor: 240MHz 3.3V dual core 32bit Espressif ...

Making a clock with a common microcontroller like an Arduino isn’t very difficult. However, if you’ve tried it, you probably discovered that keeping track of wall time is difficult without some ...

I like this. Following on from the creative use of LEDs with the Periodic Table, check out this smart shelving system, similarly driven by an Arduino and using LEDs, that serves as a clock. Not a ...

8×8 LED Matrix modules are now widely available, and fortunately they are easy to use with our favorite Arduino microcontroller. 8×8 LED Matrix module have many applications in real life, such as ...

The dot matrix clock was built without the use of a regular Arduino board but uses the ATmega168 with Arduino bootloader and assembled on a breadboard. An RTC clock compensated by temperature is used ...