[Hans Peter] wanted to move away from using full Arduino boards in his projects. One of the components he rarely used after the development stage is the USB hardware. Once the firmware is flashed to ...

This is how I wired the Arduino up with the shift registers and the EEPROM chip. It looks very confusing but most of that is just the data and address buses, which follow a very logical pin mapping. I ...

The reprogramming of the Lily main board was easily allowed by the USB to UART board that does not require the need for soldering. The Lily Pad main board is using the FT232RL integrated circuit from ...

Qualcomm and Arduino have both stated that they are committed to openness, and schematics and design files for the UNO Q will ...

If you use the Arduino IDE to program the ESP32, you might be interested in [Andreas Spiess’] latest video (see below). In it, he shows an example of using all three ESP32 UARTs from an Arduino ...

Arduino hobbyists, developers and programmers that would like to be able to remove the need to use cables to access their Arduino projects, might be interested in a new wireless programmer ...

Recently while helping a user they mentioned that they had accidentally selected the wrong serial port to flash and that when they did, the program seemed to hang. When I dug deeper I found that the ...

The circuit was based on the use of Arduino AVR to build a high voltage programmer which can be used to fix pesky fuses. The circuit was based on the use of Arduino AVR to build a high voltage ...

I had a thread over in the Programmer's Symposium, but I think the line of questioning has turned more into a kernel issue.<br><br>I have been tasked with getting response time for writing a single ...