This repository contains Arduino code used for controlling the intensity of a 12 V LED strip using a potentiometer with a ESP32 potentiometer_control_led.ino and for controlling LED brightness and ...

What is a rotary encoder? A rotary encoder (RT) is a device that you can rotate infinitely. On most rotary encoders, when you rotate them you will feel a bump (known as steps), and most RTs have about ...

I wrote a bit of VHDL for generating inc/dec pulses from quadrature rotary encoders like the CTS Electrocomponents ones I bought from Digikey for a project I worked on recently. This debounce circuit ...

As you may have noticed, I’ve been working with an STM32 ARM CPU using Mbed. There was a time when Mbed was pretty simple, but a lot has changed since it has morphed into Mbed OS. Unfortunately, that ...

Though the potentiometers and rotary encoders may look similar, they both are very different from each other. The primary difference between the rotary encoders and the potentiometer is its utility.

As you may have noticed, I’ve been working with an STM32 ARM CPU using Mbed. There was a time when Mbed was pretty simple, but a lot has changed since it has morphed into Mbed OS. Unfortunately, that ...

This project was completed on a STM32 microcontroller and used a 3-pin RGB LED and a rotary encoder. The rotary encoder was used to select the channels of the RGB LED and change their intensities to ...

“I looked at all the available rotary encoder sketches and none of them met my needs, so I have written my own, and here it is”. Well, I looked at all the available rotary encoder sketches and none of ...

Abstract: This article introduces a low-power spintronic rotary encoder capable of 8-bit analog-to-digital conversion. The proposed encoder leverages spin-Hall effect-driven domain wall motion ...

Accurate measurement of rotary shaft motion, including position, velocity, and acceleration, is crucial in numerous applications. This is typically achieved by incorporating a rotary encoder into the ...

Rotary encoders are electromechanical transducers that convert angular displacement into corresponding electrical signals interpretable by digital systems. This article specifically focuses on panel ...