This project focuses on developing a robust temperature monitoring system using an Arduino Uno R3 and an LM35 temperature sensor. The system is designed to precisely measure and display temperature ...
I have used Arduino UNO for this project. You can use other cards. NOTE: If you use another board, you may need to relocate the "SDA, SCL" pins. You can find out by looking at the data sheet of the ...
Now you can build your own room temperature monitor using an Arduino board. The circuit is a combination of an Arduino UNO board, LM35 temperature sensor, and a 16×2 Hitachi compatible LCD. It will ...
In today's fast-paced world, convenience is key. Dealing with the temperature fluctuations in your living space can be quite a hassle. For those who live in regions where the afternoons can be ...
[Edward], creator of the Cave Pearl project, an underwater data logger, needed a way to measure temperature with a microcontroller. Normally, this problem is most easily solved by throwing a ...
Abstract: Temperature Analysis Including Headcount is intended to analyze the temperature and headcount of everyone within the sensor's range. In this project, 37°C is used as a base temperature. A ...
If you wish to monitor and control the temperature of the water, or any other liquid for that matter, this water temperature controller can be of help. It will let you set the maximum temperature to ...
Use an ATtiny85 to display sensor values on an I2C LCD (equiped with PCF8574): GY21P (Si7021+SHT21) I2C sensor, temperature and relative humidity DS18b20 Dallas sensor, one wire, temperature I had ...
// C++ code // include the library code: #include // initialize the library with the numbers of the interface pins LiquidCrystal lcd(12, 11, 5, 4, 3, 2); int ultrasonic = 0; long ...
Some results have been hidden because they may be inaccessible to you
Show inaccessible results
Feedback