Refer below tutorial on Arduino ADC (Analog to Digital) using Arduino Projects - Visit for simillar projects at https://microdigisoft.com Tutorial 1: What is Arduino ...

LTC2485 is an library for the LTC2485 24 bit ADC which is typically used to monitor a voltage. With a reference voltage of 5.0 Volt, a 24 bit ADC can in theory measure voltages in the sub-microvolt ...

The single-board computer Arduino Uno Q gets a Qualcomm processor. It enables projects similar to a Raspberry Pi.

Using the Arduino ADC and DAC features to realize a full-fledged multichannel anayzer with only a few common components allowed to operate a used NaI scintillation counter (from Ebay) and compare the ...

Canadian electronics geek and nascent YouTuber [Technoyaki] wanted to measure 20 volt signals on his Arduino. One might typically use a voltage divider to knock them down to the 5 volt range of the ...

Analog-to-digital converters, or ADCs, are somewhat monolithic devices for most users, a black box that you ask nicely for the value on its input, and receive a number in return. For most readers, ...

A new fully featured Arduino development board has been created called the Prestissimo Uno+ which is now available to back via Kickstarter with earlybird pledges available from just $20, AUS$28 or ...

You can in fact receive some extremely interesting signals between 0 Hz and the ‘railway’ frequency of 16-2/3 Hz. Using the receiver described here with an ADC module described in a separate article ...