Looking for a simple circuit to control the light intensity of Light Emitting Diodes (LEDs) or similar lighting sources? Here is an Arduino based circuit with three independent pulse width modulated ...

I made this Arduino project that allows to turn ON and OFF LEDs using a cheap IR remote control as a preparation for the next big step: disassemble my girlfriend’s chinese LED lamp and replace its ...

They can’t even be controlled by an infrared remote control, not to mention the obvious fire hazard. Now, however, [Jose] has come up with an LED candle that solves all of these problems.

All the info you need right here ✦ In this occasion I'll make a lighting system to be controlled remotely from my rc using Arduino compatible boards, they will take the input from a receiver and ...

Arduino Micro has some extra leds that it is tricky to programme. Like almost all Arduinos, has a built-in led – the green one on the left in the photo. And it has a pair of yellow leds – called TX ...

Description: In this project I did a Christmas jumper with rgb LEDs, this can also be a creative clothing project or whatever ...

As you can see from that sketch and the circuit diagram, the LED is connected to the digital pin 13 of the Arduino. Once you verify (compile) the sketch and upload it to the Arduino board, you should ...

The Arduino sketch sets up the serial connection and then listens for incoming traffic. Whenever it receives a non-zero character an LED will blink.

As mentioned in LED Lightlane increases bicycle safety at night we like combinations of LEDs and bicycling on Gadget Master... Here is another example, drawn to our attention by Electronics Weekly's ...

The best/worst Arduino creation was an open-source Homeland Security non-lethal weapon project: “ THE BEDAZZLER: A Do-it-yourself Handheld LED-Incapacitator”.