An Arduino library for I²C device operations. This is an abstraction class which can be used for all I²C devices to manage its access in register access level. On addition to the device abstraction, ...

The two SCD41 sensors we want to connect have an I2C address of 0x62, which cannot be changed. Therefore, to communicate with both sensors from the micro controller, we will use a separate I2C bus for ...

M5Stackが発売された頃に調べたときは、M5Stack（ESP32）＋Arduino IDEではI2Cスレーブ通信はできなかったと思うのですが、最近見たらできるようになっていたので忘れないように書いておこうと思います。 使い方 ...

Nucleo Board STM32F303K8とArduino IDEの組み合わせでの使い方の学習です。今回はI2Cのスレーブで動かしてみます。 使い方 普通のArudinoと同じようにWireライブラリが使えます。Nucleo Board STM32F303K8の場合は、SCLがA5(PA6)ピン、SDAがA4(PA5)ピンになります。 M5Stack Core2と通信 ...

The interfacing between the Arduino with I2C is being explained in this project. The interfacing between the Arduino with I2C is being explained in this project. One good thing about using the readily ...

An RGB LED module is a versatile lighting component that can produce millions of colours by mixing red, green, and blue light. The RGB LED module used in this ESP32-S3 Box-3 Arduino programming ...