Description: Arduino---Joystick-Controlled-LED-Bar This project uses an Arduino, a joystick module, and 10 LEDs to create a dynamic LED bar that lights up based on the joystick's horizontal movement.

In this Arduino project two modules were used: An Arduino KY-016 3-color LED and an Arduino KY-023 XY-axis joystick. The color of the RGB LED is controlled by an XY Joystick (two potentiometers and a ...

In this project, we create a joystick-controlled laser by connecting two servos to a joystick and using this setup as a pan-and-tilt controller for a laser pointer.

Looking for a simple circuit to control the light intensity of Light Emitting Diodes (LEDs) or similar lighting sources? Here is an Arduino based circuit with three independent pulse width modulated ...

Intensity of light (on LDR) ↓ - Resistance↑ - Voltage at analog pin↓ - Duty cycle (PWM)↑ - Brightness of Power LED ↑ If its full bright outside (when analog value increases more than 500) the power ...

Welcome to our blog post on interfacing the WS2811 (5V) RGB LED strip with Arduino! In this guide, we will walk you through the process of connecting and controlling WS2811 LED strips using an Arduino ...

JoyStick written in HTML, CSS and pure JavaScript, to control any device. To have a quick response from the device it use the WebSocket protocol.

Animate multiple 24 VDC LED garlands with flashing and variable brightness (13 different parameters) with one Arduino Nano multi-tasking with FreeRTOS.