ESP32-CAM's Web-server Be sure to unplug the jumper wire going from IO0 to GND, press the reset button, insert a Micro SD card into the module's slot (Min. 4GB), then obtain its unique IP address from ...

Learn how to program the ESP32-CAM development board using USB to Serial converters. This guide covers pinouts, boot modes, hardware connections, and troubleshooting methods.

This repository includes source code and firmware releases for the ESP32-cam module programmed in the Arduino IDE. Currently, several versions of boards built on ESP32/ESP32S3 processors with a camera ...

The ESP32-CAM is a development board with Wi-Fi and Bluetooth capabilities, featuring an ESP32S chip module, an OV2642 camera, a micro SD card slot, nine GPIO pins, an onboard LED flash, onboard flash ...

Introduction ESP32-CAM module contains a 2MP Camera, some I/O pins and one MicroSD slot to store the images and videos. With its tiny size and 240MHz CPU is able to provide a fair quality images. This ...

A bit of ANNEX32-BASIC-script-code to control an ESP32 based pan/tilt servo CAM. No ARDUINO-Code, no compiling … just run the interpreter on the ESP32-device and develop, change, customize your ...

All smart phone are capable of taking pictures, storing and re-display. Therefore, creating another camera is not a very popular task to be considered seriously by anybody certainly not for me. But if ...

We build a finger sized wireless spy car using ESP32 Cam. This DIY micro spy robot is capable to do the live audio and video streaming ...

The power of Espressif’s ESP32-S3 meets Arduino’s unmatched customer experience, documentation and community — all in the compact form factor of the Nano. Provides support for both ...