You can read the state of a button using Arduino and a few lines of code. The actual state is shown in the Serial Monitor window as 0 or 1, 0 meaning the button is not pressed and 1 that the button is ...
First, download Arduino IDE (integrated development environment) from https://www.arduino.cc/en/software. Once you have the Arduino IDE installed, we need to verify ...
The tutorial assumes you are at least familiar with C-lang-like language. It is not meant to teach anyone how to code in AVR/Arduino from scratch. It's more like a getting started for anyone who has ...
The TSL25911 sensor module has a total of 5 pins. Two power pins, one interrupt pin, and two I2C pins. The pinout of the module is as follows: VCC - Provides power for the module, Connect to the 5V ...
Discover the ultimate IoT powerhouse—Arduino Nano ESP32! Unleash creativity with C/C++ in Arduino IDE, or embrace MicroPython's simplicity. Wi-Fi, Bluetooth 5 LE, 16 MB Flash, LEDs, all in a compact ...
The MPU6050 module has a total of 8 pins, of which at least 4 pins are necessary for the interfacing. VCC provides power for the module. Connect to the 5V pin of the Arduino. GND Ground is connected ...
We have designed an Arduino-based GPS Tracker using the NEO-6M GPS Module. A GPS (global positioning system) tracker utilises satellite signals to accurately determine the location of an object or ...
This tutorial will guide you through the process of building a tachometer around an Arduino. Tachometers are used to measure rotation rate in Revolutions Per Minute ...
Some results have been hidden because they may be inaccessible to you
Show inaccessible results
Feedback