A lot of Arduino clone boards are not using FTDI USB to Serial bridges but using the CH34x Based USB to Serial bridges, thus quite a few people have ran into issues where the OS or IDE does not ...

Open Terminal Execute the following command: csrutil enable --without kext Reboot After rebooting you should see your serial ports again in the Arduino IDE or mBlock so you can program your Me Orion ...

Above you can see [Hans’] creation next to the official Arduino USB-to-serial programmer. He used the same connection scheme, but went with an edge connector for the USB instead of using a mini ...

One of the strong points of Arduino is its easy-to-use serial port which makes it simple to export data, to send commands to it, or to help with debugging. A Serial Monitor and a Serial Plotter are ...

Once the Arduino is loaded, there is no need to open or launch it. If you unplug the USB cable, and plug back in, it may be that your computer sees this as a NEW device. If that is the case, windows ...

Once the Arduino is loaded, there is no need to open or launch it. If you unplug the USB cable, and plug back in, it may be that your computer sees this as a NEW device. If that is the case, windows ...

Getting a blank page on the Arduino Serial Monitor when you want to see the data from your sketch is frustrating, but we have some fixes.

The idea early on was to leverage existing Arduino libraries to connect with a standard USB mouse, specifically, the hardware would take the form of an Arduino Mega 2560 with a USB Host Shield.

Learn what a USB to Serial adapter is used for, when you might need one, and whether installing a driver is required for it to work properly.

Learn what a USB to Serial adapter is used for, when you might need one, and whether installing a driver is required for it to work properly.