Figure 1 provides a plot of this expression; it is a circle with a maximum of 0.5, at 50% duty factor and two zero crossings at zero and 100% duty factor. The curve is symmetric around 50%. Between 20 ...

Many power supplies use hold-up capacitors to keep enough energy at the full-wave or bridge rectifier output to supply a load when the rectified voltage drops and rises again at the next half-cycle of ...

Ideally, the power factor should be 1; then the load appears as a resistor to the AC source. However, in the real world, electrical loads not only cause distortions in AC current waveforms, but also ...