Fuzzy Output PWM = Output PWM – Previous Output PWM. To perform the motor control simple Arduino setup is designed. This setup consists of IR Receiver, which is used to measure the motor RPM, 12V DC ...

Arduino code to control one or two 12 V DC motor using PWM signals wired to a L298N driver (two channel). A two-axis joystick controls the movement of the motors.

Learn how the speed and direction of a DC motor can be controlled via an Arduino microcontroller.

Learn how to interface the MX1508 DC Motor Driver Module with Arduino. This guide covers features, specifications, pinouts, schematic, and coding for controlling small motors.

Fig. 1: Circuit diagram of DC motor starter using Arduino Uno Arduino Uno board is an important part of the circuit that generates PWM signals. Pushbuttons (S1 and S2) are used to soft-start and ...

A critical function of motor operation is speed control, which allows us to adjust the motor speed as per the application’s requirements. This guide explains the construction and operation of a DC ...

Implementation of a Fuzzy Logic speed controller for a Permanent Magnet DC (PMDC) motor using a low-cost Arduino interfaced with a standard xPC Target MATLAB environment is demonstrated. The Arduino ...

Abstract This paper describes the development and implementation of a control system for a direct current (DC) motor using the Arduino Uno microcontroller, based on the speed and direction control of ...

The most widely used control strategy in industry is proportional integral derivative (PID) controller. The popularity of PID controllers can be attributed partly to their robust performance in a wide ...

Servo motor works on the principal of Pulse Width Modulation (PWM) and its angle of rotation is controlled by the duration of the pulse applied to its control pin. Here in this tutorial we will ...