This is an EEPROM programmer made to program the AT28C64 and AT28C256 EEPROMS with arduino. The programmer was made with the purpose to program the AT28C64 EEPROM for the display register of the 8 bit ...

This is a simple circuit for programming the 28C16, 28C64, 28C256, and similar parallel EEPROMs using an Arduino. Since the Arduino doesn’t have enough pins to directly control all of the address, ...

Abstract: This paper presents an EEPROM programming controller imbedded in a passive UHF RFID transponder. A 14 V programming voltage is generated and regulated for a 224-bit EEPROM memory array from ...

Abstract: This paper presents a study of EEPROM cell programming in order to decrease the bias polarization of the memory cell. Simulations show that it is possible to erase and write a cell with a ...

We all know that solderless breadboards have their limitations. All that stray capacitance can play hell with circuits, especially high-speed stuff, but they’re so darn useful that avoiding them in ...

Turn on the EMP-20 Programmer (in back). There is a power light next to the ZIF socket (Zero Insertion Force) and the ZIF’s handle should be straight up. Set the "T" switch on the shelf next to the ...

Analog flexibility w/o complexity of firmware or digital control. It can be what you want it to be and changed in a clock ...

The M24LR64 EEPROM has a standard I²C serial and ISO15693 RF interfaces for wireless communications with RFID readers. It is available in TSSOP-8, SO-8, and MLP packages or as bare die at prices ...