NOTE: If you have FlashFloppy installed on your Gotek, you do not need to follow these steps. Instead perform a Firmware Update. NOTE: Disconnect your Gotek's power and data cables before programming.

This manual describes the basic specifications and applications of the Renesas flash programmer. It covers the basic operation and the function details in basic and full mode of the flash programmer.

PEEDI can be used in standalone mode to program more that 800 flash devices as well as AT91SAM7, LPC2000, MAC7100, STR7, STR9, TMS470, NAND FLASH, Atmel DataFlash families, MPC5500 families, ColdFire ...

@taraskornuta Also want to support this meaning. Such an approach will also reduce the lifetime of the flash itself. Allowing partial page writes will not, in any way, reduce the lifetime of the flash ...

The BDI3000 provides a high-speed connection to the target CPU (up to 32 MHz) and to the PC (via 10/100 Ethernet), resulting in very fast program downloads – up to 1,500 Kbyte/s, depending on the CPU.

We’d do it just for that alone. The rest of the procedure is to flash a DFU USB bootloader into the Arduino, then load up the flash-programmer code.

Adobe gives Flash a programming boost New betas of Flash Builder 4, Flash Catalyst, and Flash's open-source Flex underpinnings give Adobe a better response to Web apps and Microsoft's Silverlight.