Needham's EMP-21 universal device programmer from ProMicro, offers the user a choice of whether to connect to a PC via USB or by the parallel port. Supporting over 4000 devices and Windows-based ...

Needhams Electronics ' EMP-21 universal device programmer supports over 6600 devices and employs both USB and parallel ports for communication with Windows-based software. Needhams' new 'automated one ...

In the old days it was very simple to use the parallel port of a standard PC and program just about any type of AVR microcontroller with it. When you want to do that now, you're first obliged ...

Munich, Germany – The VPROG-1 programmer does not require an external power supply; drawing its power from the USB bus of a connected PC. The unit can be used to programme individual Vinculum ICs or, ...

A parallel EEPROM programmer built on a breadboard. The SN74LV8153 is a serial-to-parallel IC. It can translate serial (yes, UART) to 8 parallel output pins. In combination with a USB-to-serial ...

Programmer aids Flash ROM programming Future Technology Devices International Limited (FTDI) has announced the VPROG-1 programmer. Designed specifically to programme FTDI’s Vinculum host controller ...

Open Source Flash/EEPROM programmer This is an open source programmer for 8 bit-wide parallel Flash/EEPROM chips. So far I've only tested it with (and hardcoded the software for) 2MBit (256Kx8) JEDEC ...

[Matt Evans] was running up against the common programming gotcha caused by disappearing parallel ports. For years he had used a JTAG parallel cable when working with FPGAs but recently realized he… ...

If you’ve ever looked into low-level parallel port access you may have learned that it only works with actual parallel port hardware, and not with USB parallel port adapters. But here’s a ...

How to Operate Parallel Port Printers From USB Ports. Some businesses may still use older printers with parallel ports, and this is particularly true of devices that have special functions such as ...