The listed LED and resistor are optional and can be used as indication that the Arduino is providing 5V power to the circuit. After gathering the required parts, you can either order the PCB from your ...

The ATtiny 45 and 85 Programmer Shield is the product of a bored Saturday afternoon and using what I learnt from reading High-Low Tech's tutorial on programming an ...

[Scott] is a big fan of the Arduino platform, and he’s not afraid to admit it. It does all the things he needs, but now and again he would like to use something a bit smaller, without all the bells ...

To program the ATtiny, simply flip the switch to the “Programming” position.A red LED lights up to indicate that the device is in programming mode.Once programming is complete, return the switch to ...

Step 1: Configuring Arduino Uno as an ISP: Since ATtiny85 is just a microcontroller, it requires an ISP (In-System Programming) to be programmed. So to program the ATtiny85, we need to first configure ...

Hi, I'm Bill. I'm a software developer with a passion for making and electronics. I do a lot of things and here is where I document my learning in order to be able to inspire other people to make ...

Related to being powered by a super capacitor, I also need to get my ATtiny to go to sleep when not processing anything. And that involves setting pins to ‘interrupt-on-change’ and getting the chip to ...

Arduino enthusiasts that are searching for a wireless programming Arduino shield, which includes a motor shield and is compatible with development boards may be interested in a new piece of hardware ...