The Micro SD Card module has 6 pins; those are GND, VCC, MISO, MOSI, SCK, and CS. All the pins of this sensor module are digital, except VCC and Ground. -> GND is the ground pin of the micro sd card ...

Pin 2 on the Arduino schematic is really GPIO2 on the NINA, therefore it should not be labeled GPIO34. This is confirmed by the fact that the pin numbering on the Arduino schematic matches the pin ...

IT之家 3 月 6 日消息，Arduino 家族又添新成员，其新推出的 GIGA R1 WiFi 开发板基于双核 Arm 架构 MCU，外形与现有 Mega 和 Due 相同，尺寸仅 101 x 53 mm，提供 76 个 GPIO 引脚，而且支持无线网络。这是 Arduino 迄今为止最强的开发板，售 72.82 美元（IT之家备注：当前约 503 ...

The nRF24L01 is a small, low-price Wi-Fi verbal exchange module that keeps records over short distances. It uses radio waves to switch information at 2.4GHz, just like Wi-Fi however with decreased ...

SRKH Designs’ microZERO is a tiny, Arduino compatible module based on Microchip SAMD21 Arm Cortex-M0+ microcontroller for applications such as drone control, mobile platforms such as cars, trucks, ...

Arduino Nicla Sense Env is a new sensor module with temperature, humidity, and gas (TVOC, NO2, O3) sensing that follows the launch of the Arduino Nicla Sense ME (Motion & Environment) module over ...

The complete circuit diagram for Arduino Based Decorative Christmas Tree is given above. It is pretty simple as we only need to connect a PIR sensor, JQ6500 voice module, and Neo-Pixel LED Strip. The ...

Time synchronization for wireless sensors is important for a proper interpretation of measurements, particularly for acceleration measurements to estimate mode-shapes. This paper presents a new time ...

If you are designing your own intelligent “Graden Computer” with an optional digital plant moisture sensor/water pump controller that lights an LED to alert the user when it is time to water a potted ...

“You can’t put new wine in old bottles” – so the saying goes. But you would if you’re a hacker stuck with a radio built in 2005, which looked like it was put together using technology from 1975.