The circuit was based on the use of Arduino AVR to build a high voltage programmer which can be used to fix pesky fuses. The circuit was based on the use of Arduino AVR to build a high voltage ...

This is a simple circuit for programming the 28C16, 28C64, 28C256, and similar parallel EEPROMs using an Arduino. Since the Arduino doesn’t have enough pins to directly control all of the address, ...

The project will function as a wireless programming and debugging link to access hard to reach Arduino board inside a machine by using the XBee protocol. An FTDI cable is used to attach one XBee that ...

First, flash the arduino_icsp.ino sketch to an Arduino. This was tested with a nano, but should work on most boards. The arduino-icsp programmer takes a simple ascii based command set, so ...

[Kirill] wrote in to share his Arduino-based PIC programmer. It is capable of writing to the 18F family of chips, including 18F2XXX and 18F4XXX. We think that’s pretty exciting because this line of ...

[Hans Peter] wanted to move away from using full Arduino boards in his projects. One of the components he rarely used after the development stage is the USB hardware. Once the firmware is flashed to ...

Arduino hobbyists, developers and programmers that would like to be able to remove the need to use cables to access their Arduino projects, might be interested in a new wireless programmer ...

Arduino programmers, makers and developers that are looking for a small Arduino Programmer device might be interested in the VisiPort2. The VisiPort2 is a USB To Serial module that has been ...