Introduction Programmer for ESP8266 modules with automatic programming mode. The need has arisen for small-scale programming of ESP8266 modules. These modules are used in many IoT devices where WiFi ...

Eagle files for a small ESP8266 programmer with auto-programming mode/reset This uses mostly SMD parts, so really needs to be cooked in an oven or hotplate due to the density (difficult to get an iron ...

ESP8266 is a very nice highly integrated Wifi Microcontroller from Espressif from China. Complete assembled modules are available already for a few euros. One can use these module together with ...

This article describes a method for making an ESP8266-12E/F module programmer and also discusses the support circuitry required for real-time applications.

Socket K2 provides all signals needed (i.e. 0V, 3.3V, RX and TX) to connect and program any other ESP module to this programming interface. Although the BOM prescribes a 0805 resistor and 100nF ...

Now you have a barebones ESP-01 programming adapter ready to work with Arduino IDE. The next step is to start your own experiments with ESP-01. For examples, the Arduino core for ESP8266 comes with ...

This circuit allows to program an ESP-01 or ESP-03 FLASH, with the following advantages: - Places the ESP-01/03 in programming mode by only pressing a single button. - Allows to use a USB-Series cable ...

Beyond the 3D printed holder for the pogo pins, this programmer uses a FTDI USB-to-serial adapter, a couple passive components to smooth out the power going into the chip, and a couple buttons.